Showing posts with label punch 45hd. Show all posts
Showing posts with label punch 45hd. Show all posts

Sunday, April 15, 2012

Old School 1990's 50 Watt Cheater Amps Tested

This post will be a work in progress until I complete my round of tests on the 25x2 Watt "cheater amps" from the 90's. I'll include a spreadsheet showing the results and links to the videos I create for each amplifier. Thus far, the test will include:

1) Rockford Fosgate Punch 45HD - from approx. 1991, not a true high-current amp like many of the other's, but well known to be underrated and able to handle almost any speaker load

2) Orion 225 HCCA - from the early 90's, test will include the "Digital Reference" and maybe the "Competition Amp/X-over" models. One of the most feared cheater amps of the early through mid 90's.

3) Precision Power ProMOS 25 - also an early 90's cheater amp rated to handle 1 ohm loads and promises the warm, smooth SQ of an early PPI amp

4) Phoenix Gold MPS-2240 - part of Phoenix Gold's "Mobile Professional Series" the MPS-2240 is identical in size to the MS-275 and is a high-current amp rated at 24x2 and designed to handle loads down to 1 ohm

5) Phoenix Gold M25 - the "M" series from Phoenix Gold were known for superb SQ and are very popular among collectors and those building old school systems as well.

6) US Amps 50HCA - an early version of a 25x2 cheater from US Amps. No crossovers, no terminal strips, just raw power and old school flair

7) US Amps USA-50 - a late 90's 25x2 amp designed to handle loads down to 1 ohm

8) Zapco Z50C2 - mid-90's amp, small in footprint, big in SQ



Bookmark this page as it will be continually updated with more information on each of these amps!



--


Tuesday, January 31, 2012

Boombox Using Old School Rockford Fosgate AUDIOPhile Speakers

Custom Old School Boombox using Rockford Fosgate AUDIOphile Speakers (est. 1995)

Now, here's a project I've thought about putting together for around 20 years...a portable stereo (aka "Boombox") made from car stereo gear. In this instance, I'm using all Rockford Fosgate gear from 1995 or earlier. A single Punch 45 amplifier will power the entire system, including 4" AUDIOphile component speakers with a 1" silk-dome tweeter and bass notes will be handled by an 8" AUDIOphile subwoofer. This subwoofer should work quite nice as it is designed for a very small 0.33cu/ft sealed enclosure. The "brain" of the system will be another Rockford piece, the PA-1 pre-amp. This unit will control 2 different inputs and provide overall volume, bass, mid and treble controls.


Here is the proposed gear (subject to change):

  1. Military-Style Waterproof ABS Plastic Case
  2. Rockford Fosgate PA-1 Pre-Amp (est. 1987)
  3. Rockford Fosgate Punch 45 Amplifier (est. 1989)
  4. Rockford Fosgate RFA-414 4" AUDIOphile component system (est. 1995)
  5. Rockford Fosgate RFA-408 8" AUDIOphile subwoofer (est. 1995)
  6. (2) 8Ah Sealed Lead Acid Batteries
  7. Integrated iPod dock / AUX jack / USB port
  8. 12V Battery Gauge
  9. 12V Trickle Charger
  10. 12V 25A Lighted Switch
  11. ....more to come

I've worked on the boombox since the video below and found the case is going to be very limited in size for all of the proposed components. I may need to substitute a Punch 30 and use only one battery. Once I get the subwoofer enclosure completed (making sure to hit the optimal 0.33cu/ft internal air space), I'll have a better idea how much space I'll have for the other components. I could also use a PA-1HD or PA-2 as they are 1/2 DIN as compared to the PA-1's full DIN size, but the PA-1 just looks cooler to me!

I show off the power source(s), dual 8Ah sealed lead-acid batteries in the video. These batteries are around 4lbs each and should give us 2-3 hours of very loud playback. I'll test the playback time in an upcoming video. Again, due to space limitations, I may need to scale down to one battery.

Stay tuned for upcoming updates, the build process and the final result of my "OldSchool Boombox"


Make sure to Subscribe to my YouTube Channel to stay updated of my latest videos. You can also follow me on Twitter @oldschoolstereo.



See the video on YouTube in 1080p HD or embedded below:




Tuesday, January 24, 2012

The Vintage Rockford Fosgate Collection of OldSchoolStereo.com

Some of the Older Fosgate and Rockford Fosgate Amps in the OldSchoolStereo collection

We at OldSchoolStereo.com are Rockford Fosgate fanatics! I myself, started off with a late 80's Punch 45 and still have the amp to this day (and it still works great!). I decided to put together a video slideshow of much of our old school collection of Fosgate and Rockford Fosgate gear.

The slideshow was put together to show off models ranging from a 1978 PR-250 to the 2005 "25 To Life" Anniversary models of the Punch 45, 75 and 150. Enjoy the slideshow showing off models such as:


  • Fosgate (Pre-Rockford) Amps including the PR-220 and PR-250
  • 1st Generation Punch 45, 75, 150 and several Perfect Interface chrome and gold amp shrouds
  • 2nd Generation and HD series Punch 45, 75 and 150
  • Old School Power series amps including the Power 100HD, Power 300, Power 360, Power 650 and Power 1000 Mosfet model
  • A MASSIVE collection of the 1992-1996 DSM series amps including; Punch 40, 60, 100, 200 (plus the ix models) and a few of the 4 channel models; 4020, 160x4 and 400x4. I also show off a MINT Punch Power 500M in the original box!
  • Speakers including the "Punch Classic" subwoofers and AUDIOphile mids/tweets and subs from the mid-1990's
  • And MUCH more! Enjoy the 5 minute video!
I also created both music tracks on my iPad using GarageBand. I'm no expert making music, but have fun doing it. Let me know what you think of my beats and such.

Rockford Fosgate DSM Heaven!



Make sure to Subscribe to my YouTube Channel to stay updated of my latest videos. You can also follow me on Twitter @oldschoolstereo.



See the video on YouTube in 1080p HD or embedded below:

--

--

Friday, November 11, 2011

Can The Orion Take The Punch?


Rockford Fosgate Punch 45HD and Orion 222 SX

The Rockford Fosgate Punch 45HD and Orion 222 SX....by today's terms would be called "tweeter amps". Go back 20 years to 1991 and people were using these amps not only to power subwoofers, but in some cases entire systems! Since both amps were rated at 45 watts or less at 4 ohms (both channels), people either had really efficient speakers or didn't require high volumes, right?

Well, many people were told and believe the old school amps are always "very" or "highly" underrated. Read on to find out if this is the case with either or both of these mini powerhouses.

First up, the Orion 222 SX appears to have a heat sink surface area advantage at 8.5 x 8.5 x 2.25 inches. It carried an MSRP of $329 US back in 1991 (reference - Car Stereo Review, July/August 1991) and included the following specifications from Orion:

222 SX Ratings at 12 VDC (both channels driven):

4 ohms stereo - 22 watts RMS
2 ohms stereo - 44 watts RMS
4 ohms mono - 88 watts RMS
(not rated to handle 1 ohm stereo or 2 ohm mono loads)


More Specifications:

  • Requires external 15A Fuse, 20A provided by Orion (according to the manual)
  • Stereo, Mono or Mixed-Mono operation
  • Left and Right Peak Power LED's
  • 0.005% THD at rated power
  • Damping Factor - Greater than 500


On one side of the 222 SX are the power/ground wires (10 gauge), plus the 9-pin molex connector for speaker and turn on connections (See my Youtube Video on how to make these yourself!). The opposite end of the amp has input connections from both RCA and DIN connections. The DIN connection supports Orion EQ's and crossovers and provides phantom power for these devices as well. There are also two buttons, one for "EQ", providing a +15dB boost at 40Hz, -4dB at 200Hz and +6dB at 10kHz, in addition to a "Mono" button for bridging the amplifier. The 222 SX also has Peak/Power LED's and a single input gain control. See the connections below:


Orion 222 SX input connections, Peak/Power LED's, Gain control, EQ and Mono buttons
_________________________________________________________________________________

Next up may be Rockford Fosgate's most well known amp from the mid-80's to early 90's, the Punch 45. In 1991, Rockford updated their vulnerable Punch 45 to the Punch 45HD, aka "Hybrid Design". Again, many competitors in the late 80's/early 90's used a single Punch 45 to compete in the 50-watt and under class.

The 45HD required spade connectors for the power and ground inputs. The opposite side includes; speaker/remote connections via 6-pin Molex plug, Bass/Treble knobs, Left/Right RCA Inputs and gain controls for both channels.


(Top) Rockford Fosgate Punch 45HD's 6-pin molex connector, bass/treble controls, left and right RCA Inputs and Gains

The slightly smaller heat sink of the 45HD measures 6.6" long  x 8.6" wide x 2.2" high and carried an MSRP of $275 back in 1991 (reference - Car Stereo Review, July/August 1991).


Punch 45HD Ratings at 12.5 VDC (both channels driven):

4 ohms stereo - 22.5 watts RMS
2 ohms stereo - 35 watts RMS
4 ohms mono - 70 watts RMS
(not rated to handle 1 ohm stereo or 2 ohm mono loads)



More Specifications:

  • Requires external 15A Fuse, 20A can be substituted for "extreme" loads
  • Stereo, Mono or Mixed-Mono operation
  • 0-18dB Bass Boost at 45Hz, 0-12dB Treble Boost at 20kHz
  • 0.05% THD at rated power
  • Damping Factor - Greater than 200 at circuit board, greater than 50 at speaker leads


_________________________________________________________________________________

Now you've read about the ratings and specifications, do you have a choice between the two for powering a single 8" subwoofer? I realize these amps may not be well suited to drive subwoofers, but this is OldSchoolStereo and I'm taking the test back to the old school!! Luckily, I have an early 90's JL Audio 8W1 (4 ohm) which will be the perfect test sub for these amps. In addition to the subwoofer test, I'll also test resistive RMS wattage output from both amps at several ohm loads.

Now, the question I'm sure many of you are asking....did I have a favorite before the tests? Well, I must admit I've tested the Punch 45HD before and knew what to expect from this little "punch". That said, I had high hopes for the 222 SX based on how well the Orion 275 SX fared against the Punch 150HD and Phoenix Gold MS-275. This is a CLASSIC shootout as I expected the results to be very close. I can't go without saying I broke the rule of my YouTube channel saying I wouldn't do "woofer flex" tests. I just couldn't resist seeing how these baby amps pushed the JL 8W1. I also used my Zoom H4 audio recorder for GREAT quality bass without distortion. Just make sure you use your headphones while watching the YouTube video to get the best experience (well, unless you are watching this on your home theater with an 18" powered sub...)

I put the Orion 222 SX on the bench first and connected up the resistor bank, 1000Hz test tone and Velleman HPS50 oscilloscope/true RMS Volt meter. Results are:










Saturday, September 10, 2011

Vintage Fosgate Car Amps - PR 220 & PR-250 Pre-Rockford


Fosgate PR-250II and PR 220 Vintage Car Audio Amplifiers


--
I decided to dig out some real dinosaurs in the car audio world....the Fosgate "The Punch" PR 220 and PR-250 Type II amplifiers. These amps were produced by Fosgate Electronics, Inc. in the late 1970's before Rockford joined Fosgate. I believe the PR-250 was 1978 or 1979 and this model was also produced in 1980 as a Rockford Fosgate PR-250II (logo was different than the one pictured above). The PR 220 was also late 1970's, found in the 1978 and 1979 Car Stereo Directory issues of Audio magazine, but not in the 1976 issue. I don't have the 1977 issue to see if they are listed there...

These amplifiers were state of the art at the time they were produced. Just think, in the late 1970's, many people were still rocking 8 tracks and a cassette player was "high-end". I don't believe there were many (if any) head units with pre-outs at the time. You definitely were lucky to have one of these back then. Don't forget, 3-way 6x9's were considered high-end at this time! Take your PR-250, power up the Sony tape deck and Jensen or Sparkomatic 6x9's and you were rockin'!!

--
Another view of the Fosgate "The Punch" PR-250 Type II / PreAmp & PR 220 Amplifiers

--

The Fosgate PR-250 Type II had a matching Pre-Amp, which controlled the unit's volume, bass and treble controls. The volume knob was a smooth rotating potentiometer, while the bass and treble controls had a "clicking" type potentiometer (meaning you had only a certain number of positions, by turning these knobs, it would click into position). The PR-250's pre-amp had only two connections, both DIN style plugs. One DIN cable would be integrated in with your head unit and the other would carry the signal from the pre-amp to the PR-250 amp. Then, you would need some speakers capable of handling 50 watts RMS per channel, not the easiest task in the late 70's...The PR-250 was also bridgeable or capable of handling loads more demanding than 4 ohms.

The Fosgate PR 220 was much simpler and less powerful than the 250. It was rated at 20 watts x 2 channels into 4 ohms, no options for bridging or lower ohm loads. It also came without a pre-amp, all controls (bass and treble) were on the amp itself by 3-way sliders. Your options were low/mid/high for bass and treble adjustments. Again, speaker level inputs were the only signal source allowed into the amp and since most head units were only good for a couple of watts, the 20 watt PR 220 was a decent upgrade and would drive efficient speakers to loud (at the time) levels, around 110dB. Fosgate had a warning in the manual, "Sound levels of 110 dB have been recorded inside a car using the PR-220 and High Efficiency speakers. This is loud enough to lead to permanent loss of hearing after long periods of exposure. So use common sense.."

---
Photo (c) 2011 - Dereck Willis - OldSchoolStereo.com

---

So, you know me, I'm good for putting up video demo's right? Well yes, I have posted an overview of the amps below. That said, don't get too excited about seeing these amps in action as I'm a little hesitant to power them up. The PR 220 at least needed to pull power from the head unit for the remote turn on.

Quote by tomtomjr, one of if not the US's largest Fosgate/Rockford Fosgate collector and radio/amp technician:

" ...ALSO, on the turn on remote wire (red) , you will need to draw power from it to turn on the amp. We used to use a 12V light bulb and a switch. Put the remote wire (red) to the positive of the bulb, then the switch between the 12V ground and the 12V ground of the bulb. Flip the switch, and it will come on. These have the power-draw on the remote wire rather than the power input like modern amps... Hope this info helps........Tom"


See the video demo in 720p HD or embedded below:

---

---

Tuesday, May 31, 2011

Old School Crunch Amp - CR100

Over the years, brand names are sometimes passed along from one owner to another. Remember Polaroid instant cameras? It was only a few years ago when you may have noticed DVD players branded with the Polaroid name. Well, unfortunately in most cases, the same passing along of name brands happens in the car audio world. I myself, dropped out of the car audio industry for nearly 10 years and when I returned, the brands I knew once as high quality, "Made in the USA" were well....not what they used to be. Some people may argue the Internet forced many car audio companies out of business and although I'm not sure it is 100% the case, I'm sure it had an affect on the industry.

Now, why must I bore you with history of car audio brand names? Well, because the next amplifier I'm going to talk about is the Crunch CR100 from approx. 1992. This amp was one of several made by Zed Audio, regarded by many as some of the better old school amps. Other brands, such as HiFonics and Autotek (among others), had models of amplifiers made by Zed Audio. If you happen to visit or search eBay, you'll notice the Zed-built amps usually go for a premium.

Unlike most modern car audio amps, the CR100 has a harness for speaker connections. I'm not sure why companies continued to use these harnesses instead of barrier strips into the mid 90's?. As most of you know, these harnesses are usually lost over the years or have been cut so many times, the wires are too short! Luckily, the Crunch CR100 I picked up had about 8 inches of speaker wire and even more power/ground wiring length. An immediate problem I had was identifying the speaker and remote turn on wiring colors. Some old school amps used red for remote turn on, others used blue...this amp has both! I opened the amp to reveal the guts and it appeared the blue was the turn on, however I wanted to be 100% sure, so I confided in one of my favorite resources - diymobileaudio.com. Within a few minutes, a member posted the wiring diagram and even a link to the owner's manual. Wow, this is great!

Zed Built Crunch CR100 Guts


The CR100 also allows plug-in modules for crossover/EQ and the one on this particular unit has an M30 module - selectable high/low pass crossover, adjustable frequency and bass boost at 45hz. At the time this amp was new to the market, Crunch offered several different modules so you could customize the amp to your liking.

Crunch CR100 with M30 Module

Now that I have the wiring guide, let's hook this baby up and see what she'll do! Since I was unsure if the amp would handle realistic 1ohm loads, I kept my testing loads to 2ohms minimum (2ohms stereo or 4ohms bridged mono). I connected up the amp to my Audio Authority 100A 13.8v power supply to guarantee I had plenty of juice for the test. The manual suggests a 15A fuse, yet strangely enough says it will consume 14A at full power into 4ohms...what about 2ohms? 15A sounds a little small to me. This amp just has to be more powerful than a Rockford Fosgate Punch 45HD....doesn't it?

Crunch CR100 Wiring Harness

If you read some of the enthusiast forums online, you'll hear rhetoric like "extremely underrated" and "highly underrated" when referring to these old school amps. As my test have shown, in some cases this is accurate, but in most cases the old school amps are only slightly underrated.

Here are the ratings obtained from the Owner's Manual:
  • 50w/ch @ 4ohms stereo
  • 90w/ch @ 2ohms stereo
  • 180w bridged @ 4ohms
And here are the official OldSchoolStereo.com test results for the Crunch CR100:
  • 61.93w/ch @ 4ohms stereo
  • 88.84w/ch @ 2ohms stereo
  • 198.8w bridged @ 4ohms
For additional information on my testing methods, see my previous post: Testing Output Power from Old School Amps. 

In addition to the power output tests, I hooked up the amp to a few speakers including a JL Audio 8W1 and a 12" Rockford Fosgate Punch classic sub. I set the CR100's M30 module to low pass at approx. 120Hz. The Crunch CR100 delivered all the power the JL 8W1 wanted and kept great control of the sub during testing. I demo'd several songs including; Jazz, Pop, Rock and Rap samples from my BigD demo CD. The nearly 200 watts at 4ohms mono was ample power to shake items on the wall of the OldSchoolStereo labs (aka "my garage"). Not only impressive from a 200 watt amp, but also from a 8" subwoofer!

The Rockford Fosgate PCH-812 subwoofer is 8 ohms, so it was only seeing around 100 watts. It is a mid-90's subwoofer and only needs 100-200 watts for ample output. Again, the Crunch CR100 provided clean, accurate power allowing the Punch sub to stand up to it's name!

I'm not sure how good the Crunch CR100 would prove pushing late model, heavy magnet, inefficient subwoofers...but it does a great job powering similar age (mid 90's) subwoofers and would be a great amp for a modest system. I guess one day I'll have to get some newer subwoofers to use testing these old school amps. Yep, I'll do that just as soon as the donations help pay for some...

-------

Update: 6/26/11


I just located some Crunch amplifier ads from 1992 and 1993 Auto Sound & Security magazines. These ads show off the CR series amps and plug-in modules. With this information, I updated the post to note the amps were from the 1992 timeframe (not 1994) as originally stated. See a couple of the ads below:




Crunch Amp Ad from May 1993 - Auto Sound & Security

Crunch Amp Ad - November 1992 - Auto Sound & Security



Sunday, November 21, 2010

Rockford Fosgate Punch 45HD vs. Kicker 10" Solobaric S10c Subs

I've done several audio demonstrations with my old school amplifiers, but recently realized I haven't made a video of one showing off the P45HD! For this test, I hooked up a couple of old school Kicker Solobaric S10c subwoofers in parallel (4 ohms each sub, in parallel equals 2 ohms). I then bridged the P45HD using the orange for + and the brown for -. This gives an effective load on the P45HD as 2 ohms mono or 1 ohm stereo....isn't this a problem? Not at all my friends! Rockford didn't rate these amps to handle 1ohm loads, but anyone who knows these amps knows they were built to handle it without a sweat!

This particular demo shows off the ability of the P45HD to handle the "booty bass" tracks of the early 1990's. Most of the tracks are from Magic Mike and while this is not what I listen to now, it is what rocked my car back in high school.

Enough talk about the Punch 45HD, let's see it in action!




Here are also a few pics of the amp and it's beauty...





Sunday, November 7, 2010

Rockford Fosgate Punch 45HD - Old School Cheater Amp!

The Rockford Fosgate Punch 45HD was one of the original "cheater amps". This amp was the king of the 0-50 watt competition class in the early 90's. Other notable contenders were the Orion 225HCCA and PPI ProMos 25 (which cost nearly 2x as much). The Punch 45HD originally retailed for $279 US and was rather difficult to find in stock. Many competitors used complex passive crossover networks and several speakers (10-12 or more) all powered by the Punch 45HD. By using the "tri-mode" operation, you could bridge the channels for subwoofers while retaining stereo operation for the mids and highs.

My Punch 45HD "birth sheet" stated 91 watts/ch into 2ohm loads. I can't remember if they stated 4ohm loads back then, but it should be around 50w/ch. My birth sheet is MIA (along with the original manual), but I'm sure I'll come across it someday.

Keep tuned in for a future test comparing the 1st Gen Punch 45, Punch 45HD and the "25 to Life" Punch 45....three awesome amps ranging from the late 1980's up to 2005.